Cloud iron epoxy intermediate paint
The lacquer is a two-component epoxy intermediate coating. Group A is the curing agent, and group B is the main agent. Micaceous iron oxide is used as raw material to enhance the coating performance. It has the ability to enhance the bonding force between the primer and the topcoat, increase the thickness of the paint film, resist ultraviolet damage, and enhance the shielding effect of the coating. It can improve the corrosion resistance, weather resistance, water resistance and solvent resistance of the composite coating, and has excellent adhesion and sealing properties on the epoxy zinc-rich primer and zinc spray layer.
The paint is a one-component room temperature drying chlorinated rubber coating. It has excellent low-temperature construction performance, mutual solubility between the coating and the coating, and excellent interlayer adhesion. The coating dries quickly, has good mechanical properties, abrasion resistance, impact resistance and alkali resistance, and has good water resistance, weather resistance, dry and wet resistance. The paint film and the primer with cathodic protection function have good compatibility and good durability. But poor oil resistance.
VF0403 High Weather Resistance Fluorocarbon Coating
The paint is a solvent-based two-component room temperature curing coating. Is a kind of super weather resistance, corrosion resistance, easy to clean, easy construction of the paint. Component A is a curing agent, and component B is composed of tetrafluoroethylene-vinyl ether copolymer type 4F fluorocarbon resin and high weather resistance pigments, fillers, additives, solvents, etc.
The paint is a high solids two-component room temperature self-drying polysiloxane coating. It is a kind of heavy-duty anticorrosive topcoat coating with super weather resistance, dry-wet alternation and high salt spray resistance. Its anti-corrosion performance can reach more than 15 years. And has excellent physical and mechanical properties, paint film stain resistance, easy to clean. The paint has better recoatability than general polysiloxane topcoats.
This product is a one-component normal temperature drying asphalt coating. The product is a black varnish prepared by mixing petroleum asphalt with resin and dissolving in solvent oil. It is convenient to apply and dry quickly, and has excellent moisture-proof, sewage-resistant and flowing water resistance. Poor heat resistance of paint film.
KQ0402 acrylic polyurethane enamel
The lacquer is a two-component ambient temperature chemically cured acrylic polyurethane coating. Group A is the curing agent, and group B is the main agent. With quick drying, high hardness, excellent mechanical properties, water resistance, light and color retention and weather resistance, it is a kind of high weather resistance topcoat varieties.
DT-22 cool insulation adhesive paint
The paint is a two-component room temperature curing acrylic polyurethane coating. Group A is the curing agent, and group B is the main agent. It has excellent anti-corrosion characteristics, excellent heat preservation and weather resistance. Apply together with thermal insulation primer and heat reflective finish for thermal insulation. It can reduce the temperature in the container, reduce the "breathing loss" of chemicals in the container, and reduce energy consumption.
BS1901 Acrylic Polyurethane Finish
The paint is a two-component room temperature chemical curing aliphatic acrylic polyurethane coating. Group A is the curing agent, and group B is the main agent. Excellent mechanical properties, acid rain resistance, salt spray resistance, water resistance and anti-aging properties. This product has high volume solids, a small amount of paint per unit coating area (only 60% of the general polyurethane coating amount for the same area), good workability (no foaming or sagging phenomenon at a thickness of 50 microns for one spraying), and is a weather-resistant topcoat with very high cost performance.
Iron red penetrating rust-resistant primer
The paint is a two-component room temperature curing epoxy coating. Group A is divided into the main agent, and group B is the curing agent. Strong adhesion, rapid drying, high hardness, excellent corrosion resistance. It is used as a primer in atmospheric environment, and can provide good anti-corrosion performance when used with other coatings after good film formation.
Iron oxide red epoxy antirust primer
The paint is a two-component room temperature curing epoxy coating. Group A is divided into the main agent, and group B is the curing agent. Strong adhesion, rapid drying, high hardness, excellent corrosion resistance. It is used as a primer in atmospheric environment, and can provide good anti-corrosion performance when used with other coatings after good film formation.
Epoxy zinc phosphate (anti-rust) primer
The paint is a two-component room temperature curing epoxy coating. Group A is the curing agent, and group B is the main agent. It has excellent rust resistance, good adhesion, salt water resistance and salt spray resistance. In the atmospheric environment as a primer, good film, supporting the use of other coatings can provide good corrosion resistance.
The paint is a two-component epoxy zinc-rich paint. Group A is divided into the main agent, and group B is the curing agent. It is a product with high solids and high zinc powder content. After good film formation, the dry paint film contains a large amount of zinc powder, and the metal zinc content in the non-volatile matter is not less than 60%. Has a strong cathodic protection effect. It has excellent salt spray resistance and durability, and can provide excellent corrosion resistance when used with other coatings. Used as a primer in the atmosphere. Suitable for repair of carbon steel, inorganic zinc silicate coating and partially worn steel substrate.
E0623 Alcohol Soluble Inorganic Zinc Silicate Workshop Primer
The paint is a two-component moisture-cured inorganic zinc silicate primer. It has the characteristics of fast curing and high cost performance. At 25 ℃, the relative humidity is about 65%, and after 5 minutes of drying, it can be stacked, magnetically lifted and transported. Good heat resistance, water resistance, welding and cutting performance, high mechanical strength.
E0621 alcohol soluble inorganic zinc rich primer
The paint is a two-component inorganic zinc-rich primer. It has the characteristics of fast drying, high zinc content and high hardness of paint film. It has excellent corrosion resistance and can be used with other coatings. Good welding and cutting performance. Used as a primer in the atmosphere.
Office:023-47262501Sales Center:023-47262588
Address: DeGan Industrial Park, Jiangjin District, Chongqing
Copyright @ 2023 Chongqing Sanxia Paints Co., Ltd. All Rights Reserved
Powered by www.300.cn SEO